The role,requirements and classification of coatings in titanium plate stamping forming

Jul 08, 2025 Leave a message

GR12Titanium coil

In summary, the main purposes of using coatings in titanium sheet stamping are as follows:

First, to improve the surface quality of the parts. Through the lubricating and isolating effect of the coating, the direct contact and friction between the part surface and the die are reduced, making the part surface smoother and flatter, and enhancing the appearance and performance of the product.

Second, to protect titanium parts from oxidation. During the high-temperature forming process, titanium parts are prone to react with oxygen in the air and oxidize. The coating can form a protective film on the part surface, isolating oxygen and preventing oxidation of the parts.

Third, to reduce the pressure required for forming. The coating can reduce the friction between the part and the die, thereby reducing the pressure required for forming. This helps to lower the energy consumption and wear of the equipment and improve production efficiency.

Fourth, to extend the die life. Due to the reduction of friction and wear between the part and the die by the coating, the service life of the die is prolonged, reducing the frequency and cost of die replacement. Fifth, to control the flow of the material during deformation. The coating can influence the flow direction and speed of the material in the die, thereby better controlling the shape and dimensional accuracy of the part.

 

To achieve the above-mentioned goals, coatings generally should possess the following properties:

Firstly, they should have excellent anti-corrosion performance and contain no harmful components, thus not causing pollution to materials. This can not only protect parts from corrosion but also ensure the quality and safety of products. Secondly, coatings need to have certain adhesion and be easy to apply. Good adhesion can ensure that the coating firmly adheres to the surface of parts and molds without easily falling off, while ease of application can improve production efficiency.

 

Moreover, coatings should have sufficient strength to prevent the coating from being damaged during use. During the forming process, the coating will be subjected to certain pressure and friction, and sufficient strength can ensure the integrity of the coating and its continuous function. At the same time, coatings should have good lubricating properties. This is one of the core properties of coatings. Good lubricating properties can effectively reduce friction and lower forming pressure.

 

Additionally, coatings should be easy to remove. After the forming process is completed, the coating needs to be easily removed from the surface of parts for subsequent processing and treatment.

 

Moreover, coatings should be harmless to the health of operators. During the production process, operators will come into contact with coatings, and harmless coatings can safeguard the health of operators.

 

Finally, the cost of the coating should be low. Under the premise of meeting performance requirements, low cost can reduce production costs and enhance the market competitiveness of products. Based on the above requirements for the performance of coatings, titanium alloy plate manufacturers classify the coatings used for forming into two major categories according to different usage conditions, namely, coatings for forming at room temperature (cold forming) and coatings for forming at high temperatures.