What are the processing techniques for the threaded connections of titanium alloy pipes?

Dec 24, 2025 Leave a message

Titanium alloy pipe joint

Translation of Titanium Alloy Pipe Joint Thread Machining Text

As crucial components in hydraulic systems for connecting pipelines or installing pipelines to hydraulic elements, titanium alloy pipe joints are a general term for detachable connectors in fluid channels. They are indispensable in pipeline connections and constitute one of the main parts of hydraulic pipelines.

 

Thanks to their properties such as light weight, high strength, high heat resistance, and high corrosion resistance, titanium alloys are widely used in the aviation industry, especially in the manufacturing of aircraft, rockets, and other aerospace vehicles. However, the poor machinability of titanium alloys, particularly in terms of thread machining processes, has a severe impact on the machining quality and efficiency of part products.

 

Therefore, in-depth research on processes suitable for titanium alloy thread machining holds significant practical significance.

 

I. Processing Characteristics and Features of Titanium Alloys 1. Low Thermal Conductivity The thermal conductivity of titanium alloys is low, resulting in poor heat dissipation. During the threading processing operation, the temperature dispersion and cooling effect are poor, leading to a large amount of back deformation after processing, and subsequently causing deformation. At the same time, this characteristic also intensifies the wear on the cutting edge of the tool, reducing the service life of the tool. 2. Small Deformation Coefficient The small deformation coefficient characteristic of titanium alloys leads to increased wear of the tool during processing, increasing processing costs and difficulty. Many processing enterprises have significantly increased the frequency of tool replacement due to this characteristic of titanium alloys, seriously affecting production efficiency and economic benefits. 3. High Chemical Activity Titanium alloys have high chemical activity. When generating high temperatures during processing, they are prone to chemical reactions with other metal materials, causing adhesion between the tool and the tap, resulting in "biting" phenomena, and affecting the smooth progress of processing. The problem of bitting is a difficult issue often encountered in titanium alloy threading processing, which not only causes processing interruption but may also damage the workpiece and the tool. 4. Types and Properties of Titanium Alloys To enhance the strength of titanium metal elements, alloying elements are added to pure titanium to form titanium alloys. There are mainly three types represented by TA, TB, and TC. Among them, TC titanium alloy is a duplex alloy and is the most widely used, serving as an important raw material in the aerospace industry. Titanium alloys have excellent mechanical properties, with high strength and low density, and their strength is much greater than many alloy steels; good heat resistance, with a heat resistance strength several hundred times higher than aluminum alloys, good thermal stability; excellent low-temperature performance, remaining in good performance even at ultra-low temperatures; strong corrosion resistance, with strong resistance to acids, alkalis, humidity, chlorides, etc.; high chemical activity, capable of reacting with various chemical elements such as oxygen, nitrogen, and carbon in the air; low thermal conductivity, with a thermal conductivity far lower than iron and aluminum metals.

Titanium alloy screws

II. Selection of Thread Cutting Tools for Titanium Alloys
1. Application of Triangular Thread Broaches

For titanium alloy thread processing, triangular thread broaches are commonly used for tapping operations. The triangular thread broaches have their teeth removed in an alternating pattern at intervals, ensuring that the workpiece and the thread tool only have a single surface contact, reducing friction between them and lowering the torque generated due to friction, effectively preventing the thread tool from getting stuck or damaged, and improving the quality of thread processing. Using triangular thread broaches can double the cutting thickness and the depth of the thread hole is greater than the cold work hardening layer. Although the cutting force increases, chip removal is easier, friction is reduced, and the adhesion between the thread tool and the chip decreases, thereby improving the durability and thread accuracy of the thread tool. When designing triangular thread broaches, it is necessary to ensure that the final number of teeth is odd to reduce the force on the tooth edges. In titanium alloy thread processing, using triangular thread broaches can effectively maintain the stability of the tapping process and improve the thread accuracy.
2. Combination of High-Speed Steel Broaches and Carbide Broaches
For titanium alloy material thread processing, high-speed steel broaches are recommended. High-speed steel broaches have high toughness and resistance to deformation, as well as good wear resistance. A preliminary tapping can be done using high-speed steel broaches, followed by correction using carbide broaches for the thread hole. With the deepening of research on tool materials, it is expected that more suitable broach materials will be developed to achieve better titanium alloy thread processing. Some research institutions are conducting research on new broach materials, which is expected to bring new breakthroughs in titanium alloy thread processing.


III. Processing Technology for Thread of Titanium Alloy Pipe Joints
1. Treatment of Thread Bottom Holes
Increasing the diameter of the thread bottom hole can effectively reduce the cutting force and heat generated during processing. Due to the high strength of titanium alloy pipes, the specific amount of increasing the diameter of the thread bottom hole should be determined according to the requirements of thread contact rate and the specific number of thread heads. From the perspective of processing technology, it is advisable to appropriately increase the inner diameter requirement of the thread, reducing the thread height. Appropriately increasing the thread diameter is particularly suitable for titanium alloy and other special materials, although it will reduce the thread contact rate, but due to the increase in connection length, the thread connection remains stable and reliable. Titanium Home found in reporting on enterprise cases that enterprises using this thread bottom hole treatment method have significantly improved the quality of titanium alloy thread processing.
2. Machine Tool Thread Tapping Process
To prevent the thread tool from breaking due to excessive pressure during processing, the machine tool thread tapping processing method can be selected. The cutting speed and tool control should be controlled according to the metal properties of titanium alloy materials. Generally, the cutting speed should be maintained within a small range, preferably 200mm - 300mm per minute, but the speed should not be too small. At the same time, the geometric size of the tool should be considered, and an appropriate rake angle can be selected to increase the strength of the cutting edge and improve the durability of the tool; selecting an appropriate large clearance angle is conducive to chip removal during processing. When performing deep hole thread tapping on titanium alloy pipes, the number of chip retention slots can be reduced to increase the chip retention space and enhance the chip removal ability of the thread tool. Reasonable cutting speed and tool control are the key links to ensure the quality of titanium alloy thread processing. The thread tail stop of titanium alloy thread processing is usually longer than the standard length, and it is best to design a return slot to avoid chipping when the thread tool reaches the bottom. Selecting a coolant with good lubrication function and high activity to directly cool the thread tool can prevent the thread tool from adhering to the cutting chip due to excessive temperature during processing, affecting the processing speed and accuracy. It is recommended to use a mixed liquid of oil acid, sulfurized oil and kerosene or F43 cutting oil for cooling. When processing titanium alloy thread materials, coolant slots can be opened on the edge of the thread tool to ensure that the coolant can smoothly reach the cutting edge. Some enterprises have effectively improved the efficiency and accuracy of titanium alloy thread processing by optimizing the use of coolant and the design of coolant slots.

 

IV. Conclusion To sum up, the thread processing of titanium alloy pipe joints requires a thorough understanding of the metal characteristics and processing properties of titanium alloy materials. Based on this, appropriate tap designs and materials should be selected. At the same time, effective and reasonable processing techniques should be adopted to avoid the weaknesses of titanium alloy materials. Through the coordinated cooperation of tool selection and processing techniques, the processing accuracy and speed of titanium alloy threads can be improved.